Ordnance Material Science and Engineering 2009 Vol.32 Issue 6

Journal Articles

Laws/Policies/Regulations

Companies/Products

29 Records Found

I could not find the article I request

兵器材料科学与工程
Ordnance Material Science and Engineering

Year 2009 Volume 32

Issue 6

Sintering behavior and dielectric property of BST-BZN composite ceramics (BST-BZN复相陶瓷的烧结行为和介电性能)

LI Mingli, DU Zuoyi, JI Song, QIAN Kunming, NI Yang

.................. page:1-4

Preparation of Bi0.8La0.2FeO3/La0.7Sr0.3MnO3/SrTiO3 nano-crystalline multiferroic films (Bi0.8La0.2FeO3/La0.7Sr0.3MnO3/SrTiO3纳米晶多铁薄膜的制备)

LI Xiangcheng, LU Peixiang, YANG Guang, YAO Kailun, ZHU Bozuo

.................. page:4-6

Microstructure and texture in nickel shaped charge liner prepared by electroformation from sulfamate (氨基磺酸盐电铸镍药型罩的制备与微观组织)

LI Chunhua, CHENG Shengwei, WANG Lei, YANG Feng, TIAN Wenhuai

.................. page:7-10

Effect of magnetic annealing on the structure and magnetic properties of Fe-Ag films (磁退火对FeAg薄膜结构和磁性的影响)

LIU Mei, ZHANG Yumei, YU Yongsheng, WANG Yonghong, ZHANG Wei

.................. page:10-13

Damage nucleation numerical analysis of randomly distributed particle reinforced composites (随机分布颗粒增强复合材料损伤萌生数值分析)

YAO Zhanjun, DU Yuehe, HUANG Jian, DAI Huichuan

.................. page:13-16

Simulation and emulation of effect of crack defect on stealth performance (裂纹缺陷影响隐身性能的模拟与仿真)

XU Zhanxian

.................. page:17-19

Research on mechanical properties of composite grid structures (复合材料格栅结构的力学性能研究)

GOU Huanmin, XU Zhiwei, LI Fei, CHEN Zhenying

.................. page:19-22

Analysis of valence electron structures of Cu-Zn alloy solid solutions (Cu-Zn合金固溶体的价电子结构分析)

LI Fei, ZHAO Xia, LI Zuo, JIN Yuhua

.................. page:23-26

Research of thermal stress on electrical discharge surface strengthening (电火花表面强化的热应力研究)

TANG Jingming, JIANG Zhongyu, SHI Ping, DENG Qichao

.................. page:26-30

xin xi (信息)

.................. page:30,41,50,57,63,77,80,96

Fatigue life prediction of docking part structure for aircraft (飞机中外对接件的结构疲劳寿命预测)

LI Jin, XING Fei, CHEN Qunzhi

.................. page:31-34

Establishing dynamic constitutive model of finite element simulation for TC4 alloy cutting (TC4合金切削有限元模拟动态本构模型的建立)

YE Yugang, YIN Yan

.................. page:35-39

Experimental study for pre-hole efficiency on masonry wall target by shaped charge (聚能装药对砖墙结构靶体开孔效能试验研究)

CHANG Jingzhen, LU Yonggang, SUN Chuanjie

.................. page:39-41

Effectiveness of erosion reducing additives assessed by measuring surface temperature inside gun barrel (用内膛表面温度评估缓蚀添加剂的作用效果)

GE Chaozuo, YU Yonggang, CAO Lianzhong, LIANG Xiyao, YUAN Cheng

.................. page:42-45

Investigation on micromechanical behavior of heterogeneous materials (非均质材料的细观力学行为研究)

SHI Pingan

.................. page:45-50

Research on ballistic behavior of high nitrogen austenitic armor steel (高氮奥氏体装甲钢抗弹性能研究)

CHEN Wei, LIU Yanlin, QI Zhiwang, ZONG Zuo, HE Yong, LV Zuo

.................. page:51-55

Study on MIG welding process of medium thickness 7A05 aluminum alloy (中厚度7A05铝合金MIG焊接工艺研究)

CHEN Donggao, LIU Hongwei, TAN Bing, SHEN Yingji, WANG Fake, CHENG Chaofeng, LV Zuo

.................. page:55-57

Microstructure and mechanical properties of laser welded AZ31 magnesium alloy with moderate thickness (中厚度镁合金激光焊接组织与性能分析)

TAN Bing, ZHANG Hailing, CHEN Donggao, FENG Jiecai, QI Guo, LV Zuo

.................. page:58-61

Experiment study on the ballistic properties of ceramic/aluminum alloy composite target with different obliquity (陶瓷/铝合金复合靶板不同倾角抗弹性能试验研究)

HU Liping, WANG Zhihui, GUO Ling, HOU Shengying, HAN Su

.................. page:61-63

Technological study on the semi-bright nickel electroplating (半光亮镀镍的工艺研究)

SUN Fengmei

.................. page:64-66

Research on influencing factor of mechanical properties of SiC whisker toughened photosensitive resins (SiC晶须增韧光敏树脂的力学性能影响因素研究)

LIU Yongjiang, WANG Ailing, ZHU Limei, WANG Biao

.................. page:66-70

Micro-macro mechanical stochastic progressive failure analysis of composite (复合材料宏细观结合的随机渐进失效分析)

LI Haibin, YANG Jianhong, ZHANG Xiaojun, ZHANG Zuo, LI Ming

.................. page:70-73

Contact fatigue failure analysis of side-reducer gear of a certain heavy vehicle (某重型车辆侧减速器齿轮接触疲劳失效分析)

XIE Junfeng, ZHU Youli, HUANG Yuanlin, ZHANG Shuxiang

.................. page:74-77

Early failure analysis of large box moving die (大型箱体动模早期失效分析)

HOU Caiyun, SUN Peng, ZONG Zuo, XU Xiangqun, ZHANG Lijun, CHEN Yun, REN Lihong, WANG Xiaoyan, LI Yan, HAO Liping

.................. page:78-80

Research status of performance and space stability of flexible thermal control materials (柔性热控材料性能及其空间稳定性的研究现状)

LI Ruizuo, LI Chundong, HE Shiyu

.................. page:81-84

Research status of corrosion-resistant casting magnesium alloys (耐蚀铸造镁合金的研究现状)

XU Yongdong, ZHOU Lingzhan, ZHAO Guotian, SONG Yunkun, ZHU Xiurong, HU Shengzuo

.................. page:84-88

Research status of preparation and applications of CuS nano-powder (纳米硫化铜粉体的制备与应用研究现状)

TANG Guohu

.................. page:89-92

High speed machining of magnesium alloy (镁合金的高速切削加工研究)

GUO Zuo, WANG Rong, ZHU Xiurong

.................. page:92-96

bing qi cai liao ke xue yu gong cheng gao yue (《兵器材料科学与工程》稿约)

.................. page:封3

Recommended Journals

Oriental Forum
青岛大学
1005-7110

Modern Agricultural Machinery

1674-5604

Urban Planning Forum
同济大学
1000-3363

Materials Science and Technology
中国材料研究学会哈尔滨工业大学
1005-0299

Household Appliance Technology
中国家用电器研究所中国轻工协会家用电器工程学会
1672-0172

Journal of Southwest University for Nationalities(Natural Science Edition)
西南民族大学
1003-2843

Transactions of Beijing Institute of Technology
北京理工大学
1001-0645

Chinese Journal of Energetic Materials
中国工程物理研究院
1006-9941

Journal of Social Science of Jiamusi University
佳木斯大学
1007-9882

Measurement & Control Technology
北京长城航空测控技术研究所
1000-8829